Hewlett-Packard Vectra VL2 4/25e


Type D3124A
Serial 3416F11481
FCC ID HCJVECTRA486-XX
Manufacturer Hewlett-Packard (made in France)
Pre-loaded software MS-DOS 6.2 (*)
Date March 1994

Physical description

Type Desktop (front bezel 94-12)
Dimensions (HxWxD) 125 x 420 x 395 mm
Drive bays 2 x 3.5" (1 x half-height internal, 1 x slim), 1 x 5.25" half-height
Power supply 100 W, 115-230 V manual voltage switch (94-03)

Main board

Manufacturer Hewlett-Packard (made in Mexico)
BIOS Phoenix ver. GE.04.06 VECTRA PC, 1 Aug. 1994 (127 Kb)
Chipset ULSI
Type Socket 3
Processor Intel 486SX-25 MHz (family 4, model 2, step 3), PGA
Coprocessor N/a
External cache N/a
Memory 2 sockets for 70ns 72-pin SIMMs
Max on system board 64 Mb
Bus ISA 16-bit
Expansion slots 4 x 16-bit ISA on riser card, all available
Interface Fast-IDE (2 units), FDD (2 units)
Video Integrated Cirrus Logic CL-GDXX super-VGA display adapter (chip 9352) w. 512 Kb of memory (exp. to 1 Mb)
Ports PS/2 keyboard, PS/2 mouse, serial (UART 16450), parallel, VGA

Cards

Installed RAM 2 x 4 Mb 70ns (9346 on chips)

Storage

Diskette drive 1.44 Mb, 3.5" slim (Sony MPF-520, 9407)
Hard disk IBM H3171-A2 (170 Mb) IDE/ATA, 3.5" slim (9349 on chips) REPLACEMENT (*)

Trivia

Acquisition Sept. 02, bought for a few $ together w. some other appliances (incl. a VL2 4/50se which had been demolished)
Condition Not working (HDD and memory were missing)
Installed sw None
Repairs/modifications Added memory SIMMs and hard disk
Current status All hw working
Spare parts Almost everything: planar, power supply, etc.

Notes

(*) Original hard disk was either a 105 or a 210 Mb IDE unit. The latter system unit featured Windows for Workgroup in addition to MS-DOS


Peripherals: KEYBOARDS, MONITORS


Back to Systems Listing
Back to PCs Main Page
Back to Home page

This page was first published on the web on Oct. 11, 2002
Last revised May 24, 2004
064