Zenith Z-Select ES
| Model | ICL-6937-KT-TT |
| Type | LC32-33E |
| Serial | 2121800028 |
| Manufacturer | Zenith Data Systems (assembled in France) |
| FCC ID | E8H95HM4 |
| Pre-in stalled software | MS-DOS, MS Windows (3.x), PC Tools for Windows |
| Date | April 1995 |
Physical description
| Type | Desktop (print inside front panel 31/12/94) |
| Dimensions (HxWxD) | 120 x 355 x 380 mm |
| Drive bays | 2 x 3.5" (1 internal), 1 x 5.25" half-height |
| Power supply | 100 W, 100-127/200-240V manual voltage switch (9512) |
Main Board
| BIOS | Phoenix ver. 1.01.E (30 Nov. 94, 127 Kb) |
| Processor | Intel 486DX2-50 MHz (32-bit), PGA (fam. 4 mod. 3 step. 5, 9514) |
| Coprocessor | Integrated on 486DX |
| External cache | Sockets available for 5 DIP modules (supports a max. of 512 Kb) |
| Memory | 4 Mb, 70ns plus 2 sockets for 70ns 72-pin SIMMs |
| Bus | ISA 16-bit |
| Expansion slots | 3 x 16-bit ISA, all available |
| Video | Integrated Cirrus Logic CL-GD5424 Super-VGA adapter (chip 9427), PCI-bus, 512 Kb video memory (exp. to 1 Mb) |
| Interface | Integrated IDE/ATA (2 units), FDD (2 units) |
| Ports | PS/2 keyboard, PS/2 mouse, 2 buffered serial, parallel, VGA |
Cards
| Installed RAM | 2 x 4 Mb 70ns SIMMs (9517) (tot. mem. 12 Mb) |
| Ethernet | 3Com EtherLink III (3C509B), 16-bit ISA 10 Mb card (9504 on chip) ADDITION |
Storage
| Diskette drive | 1.44 Mb, 3.5" half-height (Panasonic JU257) |
| Hard disk | Conner CFS270A (270 Mb) IDE/ATA, 3.5" slim (9516) |
Trivia
| Acquisition | Sept. '02, paid about 5$ |
| Condition | Quite good |
| Installed sw | MS-DOS 6.22, MS Windows 3.11 (Italian), NetWare 2.11 |
| Repairs/modifications | Replaced failing onboard battery, added memory SIMMs (it had 4 Mb only) |
| Current status | All hw working |
| Current O.S. | None |
| Spare parts | Almost everything, incl. hard drive, motherboard and power supply |
 Back to Systems
Listing Back to PCs
Main Page Back to Home
page |
This page was first
published on the web on Nov. 11, 2002 |